Abrasive waterjet cutting has gained widespread acceptance as a versatile manufacturing technique capable of cutting virtually any known material. Modern high-pressure pumps, such as PMT's direct drive pump, combine hydraulic oil and a hydraulic press to achieve exceptional cutting power. PMT's direct drive pump boasts a maximum operating pressure of 60,000 psi, reducing maintenance requirements and allowing for adjustable cutting pressure as needed. Featuring three high-pressure cylinders and three high-pressure ceramic plungers, this pump eliminates the need for hydraulic oil, resulting in enhanced efficiency.
Product Advantage:
1.The direct drive pump has three high pressure cylinders, stable pressure and fast cutting speed.
2.The direct drive pump power rate is 22kw/50HZ, is frequency conversion, low energy consumption.
3. The direct drive pump doesn’t use hydraulic oil, environmental protection, low noise.
Technical Parameters:
Dimension(L*W*H) | 1200*900*1100mm |
Weight | 500kg |
Power rate | 22kw/50HP |
Max. pressure | 420Mpa /4200bar |
Working pressure | 350-380Mpa |
Max. Flow rate | 3.6L/min |
Orifice Dia | 0.30mm |
Power supply | 380 V 50hz |
Water supply | ≥15.1L/min |
